Tech. Support
(request for new user)
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
N-LINE - Linux based Single Board Computer for ICT - Novasom Industries

The Novasom N-line has been developed thinking of the ICT (Information, Communication Technology), Networking and Telecommunication markets.

The board based on the QoriQ Layerscape NXP technology is able to drive a huge amount of TCP/IP data through the port of the CPU (Ethernet – PCIe – SATA III), without loading the CPU itself, by using a dedicated HW Unit.

N-line ICT and telecommunications

The result is a strong networking capability, while the CPU is free to use any kind of customer application.

A Dual Gigabit Ethernet with different MAC, plus some PCI express connectors for expansion and some GPIO makes it easy to develop a networking embedded industrial system like never seen before.

All you need for your network project is in one system:

  • Several mPCIe expansion slots for 4G modem, Wi-Fi, GPS, SATA-RAID controller
  • Dual GIGA Ethernet
  • 1 x 100 MB for DMZ
  • Use of HW TCP/IP packet accelerator make networking fast and secure
  • GPIO, USB ready for field use
  • Redundant Power (double power supply input stage with kernel level fail management and detection)
  • Internal UPS manager with the possibility to connect directly a LiPo battery
  • Fan-less unit
  • Industrial grade (up to 5 years warranty and 10 years longevity), always supported
  • Extended temperature available
  • With its Mini ITX format it can easily be integrated into a wide variety of existing chassis, from the desktop versions to the rack ones.


  • N-LINE - Single Board Computer | Novasom Industries
  • N-LINE - Single Board Computer | Novasom Industries
  • N-LINE - Single Board Computer | Novasom Industries
  • N-LINE - Single Board Computer | Novasom Industries
  • N-LINE - Single Board Computer | Novasom Industries

SDK-NOVAEMBED - software


An instrument through a graphical interface, allows you to configure the linux kernel in a simple and intuitive thus optimizing the performance of the card.

Unique Selling Points

  • Use of HW TCP/IP packet accelerator make networking fast and secure
  • Internal UPS W battery helps to reduce cost of final solution and
    guarantee services
  • Dual Ethernet GIGA w different MAC address
  • 2 x USB3 + 1 USB2 + 1 x HA port
  • 3 x mPCIExpress full slot for any RAID controller; (1 USB with SIM ) wifi,
    3/4/5G modem, GPS
  • One SATA III controller on board
  • Can work from microSD without hhdd
  • Extended temperature available
  • Embedded (OPT) 2” display with button joystick available
  • RTC with internal rechargeable battery

Hardware Key Points

  • Mini ITX format, 4 GPIO
  • Dual power input with kernel level fail management and detection 12V (up to 19)
  • Internal UPS with external LIPO 2S battery charger and connector
  • Rugged construction, Only Industrial Components used
  • Fanless design

Warranty and Certification


Today 1 standard product are available

  • NXP LS1012 Layerscape CPU
  • 2 x 1Gbit Ethernet
  • 3 x mPCIe half size
  • 3 X USB3.0
  • 1 x USB2.0
  • UPS manager
Possibility to install:
  • HDD
  • SATA controller
  • Wi-Fi Card with single or double antenna
  • internal LiPo Battery
For details see the line brochure or the line standard product list


Our single board computers are designed to be adaptable to the needs of the customers and their production processes. Their design allows us to populate and depopulate the Novasom boards (Tailor-Made Solution) thus achieving the desired configuration and reducing costs.
If Tailor-made Solution is not enough, it is possible to Customize a standard board. We are so skilled and organized in doing this that we have a dedicated article named “SBC Customization” with a fixed price that includes the engineering service to customize one Novasom SBC plus one run of 5 Alpha prototypes.

Just call us

We have the solution for you


The Novasom Industries SBC basic Development Kit for N1 is made by one Novasom Industries N1 board, Micro SD 4GB with SDK and SW demo, power supply wall plug, console cable, instructions to download the latest version of NOVAembed™ tool with BSPFactory™ loaded into a working VM, where everything is installed, configured and nothing additional needs to be done.
It’s available also the Extended Development Kit that includes, in addition, an LVDS touch 7” with all needed cables to be directly connected to the Novasom board.

But the most important available thing is our support to help you to start.

Contact us using the tickets in the support section.

Our engineering team guarantees the success of your application installation.

We believe that a good technical support is one of the key of our and your's success. To give you the best services we can, our engineer need to understand your request , may be replicate the probem you ask , and give you a proper and sure answer. In order to do this in a structured way, we use a process and a management tools that will require a minimum process time and proper tools to avoid miss information with " quick email" .

Thanks for understand that.

Please follow the instructions below

Step 1 - Fill in the form

Step 1 - Fill in the form

To better help you, we need to identify you and your company. Please insert your company e-mail and your company name in order to allow us to easily identify you and to offer to you the best possible support. To send the request, you must accept the support conditions. After completing everything, click "Send".

This authorization will be done as soon as possible, within our business working day UTC + 2. As soon as we process the request, typically 24-48h, you will receive an email with the credentials at the email you indicate as contact. Be sure it's correctly written. A phone number will help us in case we need to contact you.

Step 2 - Access credentials

At the e-mail address entered in the initial form, an e-mail will be sent with access credentials.
Step 3 - Login with the credentials you receive

Step 3 - Login with the credentials you receive

Reconnect to the site and, with the your credentials, do the "Login"
Step 4 - Read Documentation or open a Support Case

Step 4 - Read Documentation or open a Support Case

Once logged in you will have the opportunity to choose between "Documentation" and "Cases"

"Documentation" is the section where you can find manuals, application notes and other documentation useful to make your product work. TIP: before opening a case, try to take a look at this section, the resolution of your problem could be at your fingertips.

"Cases" is the section where you can open the real requests for assistance and have a direct contact with our support team. Our target is to help you in the shortest time we can, but our main purpose is to give you a good and proper answer. Those things require time, to understand, because those things are complex and every customer is important to us.
Thanks for understanding
Step 5 - To open the Case go to

Step 5 - To open the Case go to "Cases" and select New Case

Step 6 - Fill the technical support form

Step 6 - Fill the technical support form

A new form will open and you’ll be able to insert the type of request and the type of problem. We ask you to be as precise as possible including, in addition to the problem encountered, and the identification data of the board/product (product number, serial number, DC, order code); in this way we could offer you the best possible support.
After entering all the data, press "Send". The request comes directly to our support team who will try to give you the best assistance in the shortest possible time.
TIP: to make the support as efficient as possible install on your computer Team Viewer, headphones and microphone: they may be useful to communicate with our team.

Move to below step 7

Step 7 - How to see all open Cases (will this be by company or by individual?  If individual you can indicate “your” open cases.)

Step 7 - How to see all open Cases (will this be by company or by individual? If individual you can indicate “your” open cases.)

Pressing "List Case" you’ll have the history of all the open Cases and you will to be able to monitor their statuses, maintain a dialog with our support team and to close once resolved.

Request that once a case is opened you try to maintain a dialog within the case and not start a new case unless it is for a separate “problem” warranting a separate technical investigation.