Tech. Support
(request for new user)
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
P-LINE - Single Board Computer Novasom Industries - Complete low cost powerful solution for vending, domotics, Iot, etc.

The P-Line is a product family targeted toward the HMI low price market (vending, domotics, IoT, etc.)

designed to compete with low cost boards while maintaining our high quality industrial level, and assuring the power of a 64 bit CPU, strong in data crunching as in video performance.


The P is a very small  board, approximately credit card size, so you can integrate it everywhere, but with everything necessary to guarantee an immediate bootstrap, driving a display with its backlight and touchscreen, connecting via Ethernet and USB plus two strips for GPIO  expansions and a mPCIe slot ready for use with any Wi-Fi/BT-modem-GPS you may need (so stop getting crazy with last fashion Wi-Fi/BT-mdm-gps  standard, just change the mPCIe card).

You can trust in our Linux kernel, light and extremely efficient, and program the entire family using our NovaEmbed™ tool, coming to you with a configured VM. Nothing so simple.


  • P-LINE - Single board computers | Novasom Industries
  • P-LINE - Single board computers | Novasom Industries
  • P-LINE - Single board computers | Novasom Industries

SDK-NOVAEMBED - software


An instrument through a graphical interface, allows you to configure the linux kernel in a simple and intuitive thus optimizing the performance of the card.

Unique Selling Points

  • Unit is a complete SBC with immediate bootstrap (it is not a SOM)
  • Small size and low cost, strong multimedia performance and flexibility
  • mPCIe slot with SIM bay ready for every need
  • GPIO expansion with RTC
  • NXP iMX6 series CPU
  • Linux and Android Supported O.S.
  • Dual Channel LVDS and HDMI out
  • Our proprietary Kernel and BSP guarantee stability and performance
  • Our visual programming tool NOVAembed™ with BSPFactory™ for free
  • Fully supported by NOVAsom's engineering support team
  • Fully certified board

Hardware Key Points

  • Power supply range 6.5 to 18V, plus protection on voltage inversion
  • LVDS (up to FullHD) with power supply for the backlight and I2C for driving a touch screen controller
  • RTC internal imx6 (battery with external connector) 50µA
  • Reduced dimensions: 86 mm x 54 mm (Credit Card Size)
  • HDMI + Ethernet 100 M + USB lus other USB on strip as various GPIO I2C, SPI, UART
  • eMMC option available up to 16GB;  µSD metal slot support (up to 32GB)
  • 2xRS232, 1xRS485, 1xCAN lines with transceiver

Warranty and Certification

warranty of Novasom Industries products
And if you have problems in choosing the right board, just ask. We are always available.

Today 3 different standard products are available

  • processor iMX6 SOLO @1GHz
  • 512MB RAM DDR3
  • processor iMX6 Dual Lite @1GHz
  • 1GB RAM DDR3
  • RS485/CAN drivers
  • processor iMX6 Quad @1GHz
  • 1GB RAM DDR3
  • eMMC (4GB)
  • RS485/CAN drivers
  • 3 channel USB on strip
  • SATA connector
  • RTC battery connector
  • remote IR input connector

For details see the line brochure or the line standard product list or the line quick fact sheet


Our single board computers are designed to be adaptable to the needs of the customers and their production processes. Their design allows us to populate and depopulate the Novasom boards (Tailor-Made Solution) thus achieving the desired configuration and reducing costs.
If Tailor-made Solution is not enough, it is possible to Customize a standard board. We are so skilled and organized in doing this that we have a dedicated article named “SBC Customization” with a fixed price that includes the engineering service to customize one Novasom SBC plus one run of 5 Alpha prototypes.

Just call us

We have the solution for you


The Novasom Industries SBC basic Development Kits are made by one Novasom Industries board (P7D or P8E) , Micro SD 4GB with SDK and SW demo, power supply wall plug, console cable, instructions to download the latest version of NOVAembed™ tool with BSPFactory™ loaded into a working VM, where everything is installed, configured and nothing additional needs to be done.

Via the user interface, you can turn off two or three cores and limit the memory to meet the same conditions of Novasom P6 or P7.

It’s available also the Extended Development Kit that includes, in addition, an LVDS touch 7” with all needed cables to be directly connected to the Novasom board.

But the most important available thing is our support to help you to start.

Contact us using the tickets in the support section.

Our engineering team guarantees the success of your application installation.

We believe that a good technical support is one of the key of our and your's success. To give you the best services we can, our engineer need to understand your request , may be replicate the probem you ask , and give you a proper and sure answer. In order to do this in a structured way, we use a process and a management tools that will require a minimum process time and proper tools to avoid miss information with " quick email" .

Thanks for understand that.

Please follow the instructions below

Step 1 - Fill in the form

Step 1 - Fill in the form

To better help you, we need to identify you and your company. Please insert your company e-mail and your company name in order to allow us to easily identify you and to offer to you the best possible support. To send the request, you must accept the support conditions. After completing everything, click "Send".

This authorization will be done as soon as possible, within our business working day UTC + 2. As soon as we process the request, typically 24-48h, you will receive an email with the credentials at the email you indicate as contact. Be sure it's correctly written. A phone number will help us in case we need to contact you.

Step 2 - Access credentials

At the e-mail address entered in the initial form, an e-mail will be sent with access credentials.
Step 3 - Login with the credentials you receive

Step 3 - Login with the credentials you receive

Reconnect to the site and, with the your credentials, do the "Login"
Step 4 - Read Documentation or open a Support Case

Step 4 - Read Documentation or open a Support Case

Once logged in you will have the opportunity to choose between "Documentation" and "Cases"

"Documentation" is the section where you can find manuals, application notes and other documentation useful to make your product work. TIP: before opening a case, try to take a look at this section, the resolution of your problem could be at your fingertips.

"Cases" is the section where you can open the real requests for assistance and have a direct contact with our support team. Our target is to help you in the shortest time we can, but our main purpose is to give you a good and proper answer. Those things require time, to understand, because those things are complex and every customer is important to us.
Thanks for understanding
Step 5 - To open the Case go to

Step 5 - To open the Case go to "Cases" and select New Case

Step 6 - Fill the technical support form

Step 6 - Fill the technical support form

A new form will open and you’ll be able to insert the type of request and the type of problem. We ask you to be as precise as possible including, in addition to the problem encountered, and the identification data of the board/product (product number, serial number, DC, order code); in this way we could offer you the best possible support.
After entering all the data, press "Send". The request comes directly to our support team who will try to give you the best assistance in the shortest possible time.
TIP: to make the support as efficient as possible install on your computer Team Viewer, headphones and microphone: they may be useful to communicate with our team.

Move to below step 7

Step 7 - How to see all open Cases (will this be by company or by individual?  If individual you can indicate “your” open cases.)

Step 7 - How to see all open Cases (will this be by company or by individual? If individual you can indicate “your” open cases.)

Pressing "List Case" you’ll have the history of all the open Cases and you will to be able to monitor their statuses, maintain a dialog with our support team and to close once resolved.

Request that once a case is opened you try to maintain a dialog within the case and not start a new case unless it is for a separate “problem” warranting a separate technical investigation.