Tech. Support
(request for new user)
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
Novasom Industries U-LINE single board computers - Designed for low and ultra-low power applications

Designed for low and ultra-low power applications

especially in the IoT & HMI fields where there is no particular demand for multimedia power.

Novasom Industries' U1 is little like a postal stamp, includes a Wi-Fi/BT module, a dual core CPU with a RT O.S, some, ready to use in the field, GPIO and some analog input. Probably is the smallest SBC available on the market.

  • Novasom Industries U1 Single Board computer
  • Novasom Industries U1 Single Board computer

Novasom Single Board Computer - U5

Novasom Industries' U5 is a small board, approximately credit card size, that consumes little power, but that can do much more than what you think thanks to the ARM core A7 and the optimization of our SW systems. Arrives with all necessary to guarantee an immediate bootstrap, driving an RGB display with its backlight and touchscreen, connecting via Ethernet and USB plus one strip for GPIO expansion.

  • Novasom Industries U5 Single Board computer
  • Novasom Industries U5 Single Board computer
SDK – NOVAEMBED™

SDK-NOVAEMBED - software

 

An instrument through a graphical interface, allows you to configure the linux kernel in a simple and intuitive thus optimizing the performance of the card.

Applications

This unit has been defined to quickly develop small and cost effective HMI for industrial applications, and make possible IoT and Smart Devices, for portable or wearable devices including Li-ion battery management features for solar panel input.

  • UP TO 5 YEARS TOTAL WARRANTY
  • 10/15 YEARS LIFETIME AVAILABILITY
  • ONLY INDUSTRIAL COMPONENTS USED
  • FOR IoT, LOW POWER INDUSTRIAL
  • SMART DEVICE APPLICATIONS

Our U5, M7 and M8 boards are made according to the RASPMOOD design

RASPMOOD

RASPMOOD means form factor, mechanical holes, expansion pin on strip, connector kind and position same as the famous Pi Family.

Today 2 different standard products (with different configurations) are available

  • processor [email protected]
  • 374 kb RAM
  • Wi-Fi/BT
  • GPIO
  • Free RT OS
  • UPS manager with external battery
  • Reduced dimensions: 37,5 mm x 31 mm
  • NXP iMX6 ULL CPU
  • RASPMOOD design
  • several interface
  • two different Wi-Fi/BT modules availablePIO
  • Linux OS
  • Power supply 5V, optional 6.5 to 18V
  • RGB FPC display port with power supply for the backlight too
  • RTC with extarnal battery connector and on board resistive touch controller
  • Various GPIO, A/D I2C, SPI, UART 2xRS232 (1 for Console) + 1xCAN
  • UPS manager with external battery

For details see the line brochure or the line standard product list or the line quick fact sheet

U-CUSTOM

Our single board computers are designed to be adaptable to the needs of the customers and their production processes. Their design allows us to populate and depopulate the Novasom boards (Tailor-Made Solution) thus achieving the desired configuration and reducing costs.
If Tailor-made Solution is not enough, it is possible to Customize a standard board. We are so skilled and organized in doing this that we have a dedicated article named “SBC Customization” with a fixed price that includes the engineering service to customize one Novasom SBC plus one run of 5 Alpha prototypes.

Just call us

We have the solution for you

U-EVALUATION DEVELOPMENT KIT

The Novasom Industries SBC basic Development Kits are different for U1 and U5 boards.

The one for U1 is made by one Novasom Industries U1A board, programmer and rechargeable battery. The SW is available on our site in the support section.

The one for U5 is made by one Novasom U5 board, Micro SD 4GB with SDK and SW demo, power supply wall plug, console cable, instructions to download the latest version of NOVAembed™ tool with BSPFactory™ loaded into a working VM, where everything is installed, configured and nothing additional needs to be done.
For the U5 available also is the Extended Development Kit that includes, in addition, an LVDS touch 5” with all needed cables to be directly connected to the Novasom U5 board.

But the most important available thing is our support to help you to start.

Contact us using the tickets in the support section.

Our engineering team guarantees the success of your application installation.

We believe that a good technical support is one of the key of our and your's success. To give you the best services we can, our engineer need to understand your request , may be replicate the probem you ask , and give you a proper and sure answer. In order to do this in a structured way, we use a process and a management tools that will require a minimum process time and proper tools to avoid miss information with " quick email" .

Thanks for understand that.

Please follow the instructions below

Step 1 - Fill in the form

Step 1 - Fill in the form

To better help you, we need to identify you and your company. Please insert your company e-mail and your company name in order to allow us to easily identify you and to offer to you the best possible support. To send the request, you must accept the support conditions. After completing everything, click "Send".

This authorization will be done as soon as possible, within our business working day UTC + 2. As soon as we process the request, typically 24-48h, you will receive an email with the credentials at the email you indicate as contact. Be sure it's correctly written. A phone number will help us in case we need to contact you.

Step 2 - Access credentials

At the e-mail address entered in the initial form, an e-mail will be sent with access credentials.
Step 3 - Login with the credentials you receive

Step 3 - Login with the credentials you receive

Reconnect to the site and, with the your credentials, do the "Login"
Step 4 - Read Documentation or open a Support Case

Step 4 - Read Documentation or open a Support Case

Once logged in you will have the opportunity to choose between "Documentation" and "Cases"

"Documentation" is the section where you can find manuals, application notes and other documentation useful to make your product work. TIP: before opening a case, try to take a look at this section, the resolution of your problem could be at your fingertips.

"Cases" is the section where you can open the real requests for assistance and have a direct contact with our support team. Our target is to help you in the shortest time we can, but our main purpose is to give you a good and proper answer. Those things require time, to understand, because those things are complex and every customer is important to us.
Thanks for understanding
Step 5 - To open the Case go to

Step 5 - To open the Case go to "Cases" and select New Case

Step 6 - Fill the technical support form

Step 6 - Fill the technical support form

A new form will open and you’ll be able to insert the type of request and the type of problem. We ask you to be as precise as possible including, in addition to the problem encountered, and the identification data of the board/product (product number, serial number, DC, order code); in this way we could offer you the best possible support.
After entering all the data, press "Send". The request comes directly to our support team who will try to give you the best assistance in the shortest possible time.
TIP: to make the support as efficient as possible install on your computer Team Viewer, headphones and microphone: they may be useful to communicate with our team.

Move to below step 7

Step 7 - How to see all open Cases (will this be by company or by individual?  If individual you can indicate “your” open cases.)

Step 7 - How to see all open Cases (will this be by company or by individual? If individual you can indicate “your” open cases.)

Pressing "List Case" you’ll have the history of all the open Cases and you will to be able to monitor their statuses, maintain a dialog with our support team and to close once resolved.

Request that once a case is opened you try to maintain a dialog within the case and not start a new case unless it is for a separate “problem” warranting a separate technical investigation.